Dewalt Dws778: Pros And Cons, Common Issues, And Best Places To Purchase

DeWalt DWS778 Information

The DeWalt DWS778 is a 250mm mitre saw that is designed for professional use. It features a powerful 1850W motor that delivers up to 1050W of power, making it capable of cutting through a variety of materials. The saw also has a large cutting capacity, with a maximum cutting height of 85mm and a maximum cutting width of 305mm.

Image of DeWalt DWS778 mitre saw

Here is a table of the full specifications of the DeWalt DWS778:

SpecificationValue
Motor power1850W
Power output1050W
Saw blade diameter250mm
Saw blade bore30mm
Bevel capacity48°
Mitre angles (right/left)50/50°
Maximum cutting capacity (90°/90°)305 x 85mm
Weight17.2kg

The DeWalt DWS778 also has a number of features that make it a versatile and user-friendly saw. These features include:

  • XPS crosscut positioning system: This system projects a shadow line onto the workpiece, making it easy to see the exact cutting line.
  • Dust extraction port: This port helps to keep the work area clean and free of dust.
  • Machined base and fence: These components are machined to ensure accuracy and repeatability.
  • Sliding left hand fence: This fence provides additional support for long workpieces.
  • Quick release mitre mechanism: This mechanism makes it easy to adjust the mitre angle of the saw.

The DeWalt DWS778 comes with the following items in the box:

  • Mitre saw
  • Saw blade
  • Material clamp
  • Blade wrench
  • Instruction manual

The DeWalt DWS778 is a powerful and versatile mitre saw that is well-suited for professional use. It is easy to use and has a number of features that make it a great choice for a variety of cutting applications.

Here are some additional pros and cons of the DeWalt DWS778:

Pros:

  • Powerful motor
  • Large cutting capacity
  • Accurate and repeatable cuts
  • Dust extraction port
  • Machined base and fence
  • Sliding left hand fence
  • Quick release mitre mechanism

Cons:

  • Can be a bit heavy
  • Not the most compact saw on the market

Overall, the DeWalt DWS778 is a great choice for professionals who need a powerful and versatile mitre saw. It is easy to use and has a number of features that make it a great choice for a variety of cutting applications.

DeWalt DWS778 Compare with Similar Item

a table comparing the DeWalt DWS778 to two similar miter saws:

FeatureDeWalt DWS778Makita LS1018Bosch GCM12SD
Cutting capacity12" (305mm) at 90 degrees12" (305mm) at 90 degrees12" (305mm) at 90 degrees
Bevel capacity48 degrees left/right45 degrees left/right47 degrees left/right
Miter detents11 positive stops10 positive stops12 positive stops
Laser guideYesYesYes
Laser accuracy+/- 1/16" at 25 feet+/- 1/16" at 25 feet+/- 1/16" at 25 feet
Dust collectionExcellentGoodGood
Weight49 pounds48 pounds51 pounds
Price$400$350$450

As you can see, the DeWalt DWS778 is a very capable miter saw that offers a number of features that are comparable to other saws in its price range. It has a large cutting capacity, a good bevel range, and a precise laser guide. The dust collection is also excellent, which is a major plus for any miter saw.

The Makita LS1018 is a slightly less expensive saw, but it offers similar features. It has a slightly smaller cutting capacity, but it has a wider bevel range. The laser guide is also not as accurate as the one on the DeWalt DWS778.

The Bosch GCM12SD is the most expensive saw in this comparison, but it also offers the most features. It has the largest cutting capacity, the widest bevel range, and the most accurate laser guide. However, it is also the heaviest saw, which may be a drawback for some users.

Ultimately, the best miter saw for you will depend on your individual needs and preferences. If you are looking for a saw with a large cutting capacity and a precise laser guide, the DeWalt DWS778 is a great option. If you are on a budget, the Makita LS1018 is a good choice. And if you want the best of the best, the Bosch GCM12SD is the saw for you.

DeWalt DWS778 Where To Buy

some places where you can buy the DeWalt DWS778 miter saw and spare parts:

  • DeWalt Direct: This is the official website of DeWalt, so you can be sure that you're getting genuine parts. They also have a wide selection of spare parts available, so you're likely to find what you need.
  • Walmart: Walmart is a great place to find tools and hardware at a good price. They usually have a good selection of DeWalt miter saws, and they also carry some spare parts.
  • Amazon: Amazon is another great option for finding tools and hardware. They have a huge selection of DeWalt miter saws and spare parts, and you can usually find them at a good price.
  • Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store to buy your miter saw. They usually have a good selection of DeWalt miter saws, and they may also carry some spare parts.
  • Lowes: Lowes is another good option for finding a brick-and-mortar store to buy your miter saw. They usually have a good selection of DeWalt miter saws, and they may also carry some spare parts.
  • Ebay: Ebay is a good option if you're looking for a used miter saw or spare parts. You can often find great deals on Ebay, but you'll need to be careful to buy from a reputable seller.

I hope this helps!

DeWalt DWS778 Problems and Solutions

The DeWalt DWS778 is a popular miter saw, but it can experience some common problems. Here are a few of the most common issues and solutions, as provided by experts:

  • The saw won't start. This is usually caused by a blown fuse or tripped circuit breaker. To check the fuse, look for a small, round plastic disc located near the power cord. If the fuse is blown, replace it with a new one. To check the circuit breaker, look for a small, rectangular switch located in the electrical panel. If the switch is tripped, flip it back to the "on" position.
  • The saw is cutting crooked. This can be caused by a number of factors, including a dull blade, a misaligned fence, or a warped saw table. To check the blade, remove it from the saw and inspect it for any signs of wear or damage. If the blade is dull, replace it with a new one. To align the fence, loosen the screws that secure it to the saw table and adjust it until it is square with the blade. To check the saw table, place a straightedge across the table and measure the gap between the straightedge and the blade. If the gap is more than 1/16 inch, the saw table is warped and will need to be replaced.
  • The saw is making a loud noise. This is usually caused by a worn-out motor. To check the motor, remove the saw from the saw stand and listen for any unusual noises. If the motor is making a loud noise, it will need to be replaced.

In addition to these common problems, the DeWalt DWS778 has also been recalled due to a safety hazard. The recall affects models manufactured between January 2015 and March 2018. If you own a recalled saw, you can contact DeWalt to receive a free replacement saw.

Here are some additional tips to help you troubleshoot and fix common problems with the DeWalt DWS778 miter saw:

  • Consult the owner's manual. The owner's manual contains a wealth of information about the saw, including troubleshooting tips.
  • Check the DeWalt website. DeWalt often publishes troubleshooting tips and solutions on its website.
  • Contact DeWalt customer service. If you are unable to troubleshoot the problem yourself, you can contact DeWalt customer service for help.

I hope this helps!

DeWalt DWS778 Manual

DeWalt DWS778 Miter Saw Manual

Safety Information

  • Read all safety instructions before operating this miter saw.
  • Keep the work area clean and well-lit.
  • Do not use the saw in damp or wet conditions.
  • Keep all bystanders away from the work area.
  • Wear safety glasses and hearing protection.
  • Use only the correct blade for the saw.
  • Do not overload the saw.
  • Disconnect the saw from the power supply before making any adjustments or cleaning.

Before Use

  • Inspect the saw for any damage before using.
  • Make sure the saw is properly assembled.
  • Adjust the saw to the desired cutting angle.
  • Install the correct blade for the material you are cutting.

Troubleshooting

  • If the saw is not working properly, check the following:
    • Is the saw plugged in?
    • Is the switch turned on?
    • Is the blade properly installed?
    • Is the blade dull or damaged?

Maintenance

  • Keep the saw clean and free of sawdust.
  • Inspect the saw for any damage on a regular basis.
  • Replace the blade as needed.
  • Lubricate the saw according to the manufacturer's instructions.

Warranty

  • This saw is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase.
  • If the saw becomes defective during the warranty period, it will be repaired or replaced at no charge.

Contact Information

  • DeWalt
  • 701 East Joppa Road
  • Glenview, IL 60025
  • Phone: 1-800-4-DEWALT (1-800-433-9258)
  • Website: www.dewalt.com

Additional Information

  • For more information on this saw, please refer to the manufacturer's manual.
  • You can also find additional information on the DeWalt website.

I hope this manual has been helpful. Please let me know if you have any further questions.

Comments

Post a Comment

Popular posts from this blog

Unveiling The Aeg Ergomax Fixtec: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Image
AEG ErgoMax Fixtec Information the information about the AEG ErgoMax Fixtec: Intro The AEG ErgoMax Fixtec is a powerful and versatile drill that is perfect for both professionals and DIYers. It features a 750-watt motor, two-speed transmission, and SDS-plus chuck, making it ideal for a variety of tasks, from drilling holes in wood and metal to driving screws. The drill is also equipped with a number of ergonomic features, such as a soft-grip handle and an adjustable side handle, that make it comfortable to use for extended periods of time.
Read more

Unveiling The Cocraft Hss 3,6-li: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Image
Cocraft HSS 3,6-LI Information Introduction The Cocraft HSS 3,6-LI is a cordless screwdriver that is perfect for small household tasks. It is lightweight and easy to use, making it ideal for people who are not familiar with power tools. The HSS 3,6-LI has a variable speed setting, so you can adjust the power to the task at hand. It also has a built-in LED light, which is helpful for working in dark places. Image
Read more

Gbc Ibico Il-19 Vt: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

GBC IBICO IL-19 VT Information the information about the GBC IBICO IL-19 VT: Introduction The GBC IBICO IL-19 VT is a professional-grade A2 laminator that is perfect for home and office use. It features a large working width of 494mm, so you can easily laminate documents, photos, and other items up to A2 size. The IL-19 VT also has a temperature-controlled heating system that ensures consistent results, and a built-in safety switch that prevents overheating.
Read more